Self Centering Doweling Jig Kit Drill Guide Bushings
- Free worldwide shipping
- Low stock - 10 items left
- Inventory on the way
- 【Drill-hole sizes】1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch, suitable for creating different wood pin joints
- 【Six hardened steel bushings】Two each of 1/4-Inch, 5/16-Inch and 3/8-Inch
- 【Ability】Adjustable, it can clamp on different thickness of wood boards from 10mm(0.39 Inch ) to 55mm(2.17 Inch).
- 【Material】Made of special aluminum, corrosion-resistant and longer service life
- 【Use】Fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.If there is a problem of asymmetry between the left and right distances in the use of the fixture, please refer to the practice in A+ to adjust
Product Description
Self Centering Doweling Jig Kit:
1: Clamp the Doweling Jig Kit with Doweling Jig Bushings on a workpiece to effortlessly drill dowel pins that require precise right-angles and exact alignment
2: No measuring or calculating necessary
3: You can even take precision a step further and mark and align the jig to get perfect results
4: 4 extremely accurate guide holes for the supplied bushings which makes this jig an essential part of every carpenter’s toolbox for serious joining of miter, butt, and edge joints
5: Solid steel guide center holes are precision drilled and reamed to exact size for maximum accuracy so you can drill bit for mortising, constructing wooden frames, and repairing tables
6: Ease of use and strength of jig is very suitable for woodworking veterans and novices
7:You can drill two identical parallel holes without moving the jig thanks to the 5 standard SAE drill boring sizes 1/4-inch, 3/8-inch, 5/16-inch, 7/16-inch, and 1/2-inch
8: Large steel clamping screw tightens the tool like a vise with the rugged aluminum sides holding your work securely without damaging your application
9: Regularly clean and lightly oil the center screw for smooth action
Drill-hole sizes:1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch | Six hardened steel bushings:Two each of 1/4-Inch, 5/16-Inch and 3/8-Inch | Material:Made of special aluminum, corrosion-resistant and longer service life |
Ability:
Adjustable, it can clamp on different thickness of wood boards from 11mm (0.44 Inch ) to 57mm (2.24 Inch).Provide bushes of different sizes to realize simple and convenient precise drilling.
The positioning is more accurate than other doweling jigs, no offset or gaps are left.
Note:
There are 4 holes along the top of the jig,only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits.
How to solve the problem of not centering ？
1: In the process of using, if the left and right distances of individual products are asymmetry or deviation, it can be adjusted
2: Use the inner hexagon to unscrew the two screws on the left
3: Adjust the big screw on the middle pole to make the left and right distances of the product consistent
4: After the left and right distances are the same, tighten the two hexagon socket screws on the left
5: Twist the small rotating rod, test whether the left and right distances are uniform, if they are consistent, the debugging can be used, if there is deviation, then follow the above steps to make slight adjustments
6: After debugging, the left and right balance distances are the same
7: In the follow-up, we will strictly debug the product before leaving the factory to ensure the quality of the product, and give a small wrench as a gift, which is convenient for use and can be adjusted with slight deviations.
| Material | Red painted film special aluminum | Special aluminum | Black oxide film special aluminum |
|---|---|---|---|
| Drill-hole sizes | Two each of 1/4-Inch, 5/16-Inch and 3/8-Inch | Two each of 1/4-Inch, 5/16-Inch and 3/8-Inch | Two each of 1/4-Inch, 5/16-Inch and 3/8-Inch |